Product Ratings - Akron SEVERE DUTY 3491 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
The following is intended to provide the basic instructions for installation, operation and maintenance of the Severe Duty
electric monitor, and to assist in attaining the best possible performance from the unit. Read and understand these oper-
ating instructions before use.

PRODUCT RATINGS

INPUT POWER REQUIREMENT:
12VDC (Min: 11VDC; Max: 14VDC) OR
24VDC (Min: 22VDC; Max: 28VDC)
• RECOMMENDED POWER WIRE SIZE:
• REQUIRED FUSE:
• PEAK AMP DRAW:
Maximum Motor Current Draw:
12 volt versions
24 volt versions
Normal Operating Current: (Depending on operating conditions–pressure, flow, etc.)
12 volt versions
24 volt versions
Minimum Voltage: (Truck engine must be operating for proper voltage requirement.)
All 12 volt motors: 11.5 volts while operating
All 24 volt motors: 23 volts while operating
Mass: 31 lbs. (14.1 kg)
Maximum Flow: 750 gpm (2840 lpm)
Maximum Pressure: 200 psi (14 bar)
Noise Emission: 91 DB @ 1m with maximum flow
STYLE 3491 SEVERE DUTY™
FOR STYLE 6032 UNIVERSAL 2 LOGIC BOX
12VDC: 10AWG
24VDC: 12AWG
12VDC: 20 amp Slow Blow
24VDC: 10 amp Slow Blow
50 amps for 100ms
15.0 amps each for elevation and rotation motors
3.0 amps for nozzle pattern motor
7.5 amps each for elevation and rotation motors
1.5 amps for nozzle pattern motor
3.0 to 10.0 amps each for elevation and rotation
0.7 amps for nozzle pattern motor
2 - 5 amps each for elevation and rotation motors
0.4 amps for nozzle pattern motor
127001