User Setup Instructions - Marley Smart Serie Manual De Operaciones

INSTRUCTIONS TO SET DAY / TIME
5. After the last parameter is set, touch the MODE
settings.
NoTe: If this setup is performed by the installer, power down the unit by touch-
ing the POWER

USER SETUP INSTRUCTIONS

This heater is equipped with default settings for the "Automatic Mode". Settings
are shown in the following list. If these settings are satisfactory, skip to the next
programming option, Celsius and Fahrenheit (page 13). If not, follow the steps
listed for "Ready, Set, Go Programming".
8
button if no other programming will be done at this time.
(Continued)
button to lock in your