Marley Smart Serie Manual De Operaciones página 24

ERROR CODES
(Continued)
eS/Temperature will toggle back and forth on the display if there is an
overheat condition. A red warning light will illuminate, the alarm will
beep 10 times and ES/Temperature will continue to flash on the display.
See THERMAL LIMIT CONTROL (Manual Reset) on page 18.
eS will toggle back and forth with E1/E2 on the display if there is a
malfunction with one of the thermistors. A red warning light will
illuminate, the alarm will beep 10 times and ES and E1/E2 will continue to
flash on the display. The user should disconnect power at the main circuit
panel and call Technical Support: 800-642-4328.
If you should need additional assitance with your heater, technical service is
available Monday through Friday 8:00 am to 4:30 pm EST.
Technical Service: 800-642-4328
General information can be found on the web:
470 Beauty Spot Road E
www.marleymep.com
Bennettsville, SC 29512
22