Operating Instructions; Initial Setup Instructions; Instructions To Set Time / Day - Marley Smart Serie Manual De Operaciones

OPERATING INSTRUCTIONS

When the heater is first powered up, it will default to ON. The green power
indicator LED light will illuminate as long as there is power to the heater.

INITIAL SETUP INSTRUCTIONS

If the unit is OFF, touch POWER
backlight will illuminate.
NoTe: If the heater is in the stand by mode (where display backlight is off),
touching any button will illuminate the backlight, display icons and operating
buttons. Touching the POWER
will illuminate the backlight. Touching the POWER
heater off. Power is still live to the heater when the display is OFF.
INSTRUCTIONS TO SET DAY / TIME
NoTe: The display will automatically save the setting after a 30 second pause
and return to previous operating setting. If this occurs, start back at Step 1 of
these instructions.
6
(Performed by the installer)
button located on the display. The LCD
button when the heater is in stand by mode
(Performed by the installer)
button again will turn the