Error Codes - Marley Smart Serie Manual De Operaciones

ERROR CODES

In the event of overheating or other malfunction the heater will display
one of the error codes below:
e1 is displayed if the regulating thermistor is OPEN. A red warning light
will illuminate, the alarm will beep 10 times and E1 will continue to flash
on the display. The user should disconnect power at the main circuit panel
and call Technical Support: 800-642-4328.
e2 will be displayed if the regulating thermistor has malfunctioned. A red
warning light will illuminate, the alarm will beep 10 times and E2 will
continue to flash on the display. The user should disconnect power at the
main circuit panel and call Technical Support: 800-642-4328.
eS will be displayed if the Thermal Limit Control has malfunctioned. A
red warning light will illuminate, the alarm will beep 10 times and ES will
continue to flash on the display. The user should disconnect power at the
main circuit panel and call Technical Support: 800-642-4328.
21