Installation And Operation; Hardware Installation; Download And Install Controlspace Designer Software; Mount Processor In Rack - Bose Professional ControlSpace EX-1280C Guía De Instalación Y Funcionamiento

pro.Bose.com

Hardware Installation

To set up the ControlSpace EX-1280C for the first time:
1. Download and install ControlSpace® Designer
2.

Mount processor in rack

3. Make analog audio connections
4. Make VoIP and far-end connections
5. Connect AmpLink-enabled amplifier
6. Make remote control connections
7. Make GPIO connections
8. Connect power cord
9. Establish network connection
10. Configure processor using ControlSpace Designer software
Note: Due to ventilation requirements, ensure proper enclosure ventilation if the unit is installed in an enclosed
space such as a cabinet or credenza.

1. Download and Install ControlSpace Designer Software

Download and install ControlSpace Designer software to a PC on the same local subnet as the EX-1280C
conferencing processor. Visit pro.Bose.com to download the latest software version, which includes product
firmware, the latest algorithms, and a detailed help system to guide system designers and installers through
configuring the processor for use in high-quality audio systems.
2. Mount Processor in Rack
The EX-1280C processor is designed to fit standard 48 cm (19 inch) rack equipment, occupying 1 rack-unit (RU)
in height, and requires a mounting depth of 265 mm (10.5 inches) from the front rack rail. Use four fasteners with
washers (not supplied) to mount the processor.
The product uses two variable speed fans and can safely operate in ambient conditions from 0°C - 40°C
(32°F - 104°F). Refer to Technical Specifications in this guide for power dissipation ratings.
CAUTION: Only use the mounting hardware recommended by the rack manufacturer.
software
TM

Installation and Operation

Installation and Operation Guide - 17