Technical Specifications - Bose Professional ControlSpace EX-1280C Guía De Instalación Y Funcionamiento

Technical Information

Technical Specifications

Integrated DSP
Signal Processor
Maximum Calculation
Delay
Audio Latency
A/D and D/A Converters
Sample Rate
Analog Audio Inputs
Input Channels
Connectors, Input
Input Impedance
Maximum Input Level
Equivalent Input Noise
Phantom Power
Gain Settings
Analog Audio Outputs
Output Channels
Connectors
Output Impedance
Maximum Output Level
Audio Performance Specifications
Frequency Response
THD+N
Channel Separation (Crosstalk) < -105 dB at +4 dBu input and output level, 1 kHz
Dynamic Range
Audio Over IP
Dante
Digital Audio Outputs
AmpLink
Communication Ports
USB Device
VoIP
PSTN
USB Host
Control Inputs
Inputs (Control)
Analog Input Voltage Range
Digital Input Voltage Range
30 - Installation and Operation Guide
32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600Mhz
3.6 GIPS / 2.7 GFLOPS
43 s
1.05 ms (analog in to analog out, without AEC)
24-bit
48 kHz
12 balanced, mic/line level
3.81 mm Euroblock, 6-pin
12 kΩ @ 1 kHz (with or without phantom power active)
+24 dBu
-118 dB at 44 dB gain setting
+48 VDC, 10 mA, selectable per input
0/14/24/32/44/54/64 dB
8 balanced, line-level
3.81 mm Euroblock, 6-pin
200 Ω
+24 dBu
20 to 20kHz (+0.3 dB/-0.1 dB)
0.002% at +4 dBu (A-weighted/20 Hz - 20 kHz)
> 115 dB, A-weighted 20 Hz - 20 kHz, analog input to analog output
64x64, primary/secondary
8 ultra-low latency < 21 μs, 48kHz
Micro B, stereo in/out
RJ-45; 2 lines, 2 instances per line
RJ-11; 1 line, Tx/Rx
Type A. For future use
5 analog or digital inputs, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm
Euroblock, 6-pin
0 V to 3.3 V (maximum 5 V)
0 V to 3.3 V (threshold voltage = 1.6 V)
pro.Bose.com