Picture Menu - Lenco DVL-2214 Manual Del Usuario

PICTURE MENU

Press MENU button to display the main menu.
◄ ►
Press / button to select
menu, then press
The image on the left depicts the picture menu.
The definition of each option:
Picture Mode: Changes the picture mode in
sequence:
Dynamic Standard
may select the picture mode by pressing P.MODE
button repeatedly.
Brightness: Changes the value of brightness with the
key in the range of 0 to 100.
Contrast: Changes the value of contrast with the key
in the range of 0 to 100.
Sharpness: Changes the value of sharpness with
key in the range of 0 to 100.
Saturation: Changes the value of colour with the key
in the range of 0 to 100.
Hue: Changes the value of tint with the key in the
range of 0 to 100 (For NTSC signal only).
Colour Temp: Changes the colour temperature
in sequence: Cool
Aspect Ratio: Changes the picture aspect ratio in
sequence: FULL
The options will be different under various signal
source.
NR: Changes the picture noise reduction in sequence:
Off Weak
MPEG NR: Changes the MPEG noise reduction in
sequence: Off
Dynamic Contrast: Changes the picture dynamic
contrast setting in sequence: Off
Medium Strong.
E13
PICTURE
▼
OK button to enter.
/
Mild Personal. You
Standard Warm.
4:3 ZOOM1
Medium Strong.
Weak Medium
Weak
in the main
ZOOM2.
Strong.