Components; Warnings - Sagola 6110 Manual De Instrucciones Y Lista De Repuestos

1 - Body of the tank
2 - Lid
3 - Fluid outlet ball valve
4 - Manual remover handle
5 - Air inlet
6 - Gun pressure regulator
7 - Pressure pots regulator
8 - Security Valve
9 - Clamp
7
It is advisable to read all the instructions
indicated below carefully.
• Before putting the unit into operation, and
especially after each cleaning and/or repair
operation, a check must be made that the
pressure pot

components

tightened and that the air and/or product hoses
are airtight (no air leaks). Faulty parts must be
replaced or repaired as appropriate.
• Ensure that the products to be applied are
chemically compatible with the components
these come into contact with (aluminium,
stainless steel, polythene and acetylene resin).
Do not use corrosive or abrasive products.
• The pressure pot has been designed for long
service and can be used with the majority of the
products available on the market. Its use with
highly aggressive products will quickly increase
the need for maintenance and spares. If you
need to apply special products, please contact
SAGOLA S.A.
4. COMPONENTS
8
6
5

5. WARNINGS

• Read and apply all the information, instruc-
tions and safety measures indicated by the
manufacturer of the products to be applied
(thinners, etc.) as these may provoke chemical
reactions, fires and/or explosions, or be toxic,
irritant or harmful and in all cases dangerous for
are securely the health and personal safety of the user and
of other persons nearby.
• Mix, prepare and filter the product to be
applied in accordance with the manufacturer's
instructions, ensuring that any foreign bodies
are prevented from spoiling the quality of finish
and application. Should there be any doubt
relating to the purity of the product, its composi-
tion, etc., please contact your supplier.
• Control the viscosity of the product to be
applied with the SAGOLA Viscosimeter - Code
56418001
- 15 -
3
2
4
9
1