babymoov YOO Care Instrucciones De Uso página 13

Speaker volume
Press the Up/Down keys (12) (13) to select
«Volume», then hold down the On/Off button (20) to
confirm. Press the Up/Down keys (12) (13) to select
one of five levels (1 is the lowest, and 5 is the highest),
then hold down the On/Off button (20) to confirm.
At every step, you can press the menu icon (14) to
exit the menu.
9. As soon as the receiver receives a signal, the visual
alarm indicator (19) is activated. The louder your
baby's voice, the brighter the alarm. This function
is useful for parents who prefer to keep the speaker
volume low for a quiet room, while still monitoring
their baby.
10. Four icons appear along the top of the screen:
Signal strength Temperature
In the range, when the signal strength shows 6
bars, the image on the screen (16) will be sharp
and in colour. However, as the distance between
the transmitter and the receiver increases, the signal
strength will weaken and the image will become
blurrier. At a certain distance, the image will become
fixed, and a «No signal or out of range» message will
be displayed on the screen (16). This message will
be displayed at regular intervals on the screen (16).
At the same time, the visual alarm indicator (19) and
the connection icon (11) will flash and an audible
alarm will sound. To shut off the audible alarm, hold
down the On/Off button (20). The message on the
screen (16), the visual alarm indicator (19) and the
connection icon (11) will continue flashing until the
correct distance is reached.
When the receiver returns within range, the audible
alarm shuts off and the visual alarm indicator (19)
stops flashing. If a signal is received, the connection
icon (11) will remain green.
The temperature icon indicates the current
temperature in baby's room.
The battery icon indicates the receiver's battery level.
The bars disappear as the battery runs down until no
bars are displayed. The icon then turns from green
to flashing red and an audible alarm sounds to warn
you that you need to change the battery.
While charging, the battery icon appears full (even if
the battery isn't yet fully charged) but the operation/
Transmitter number
and battery level
Battery level
YOO CARE • Instructions for use
low battery icon (10) remains red until the battery is
fully charged (when it turns green).
11. When the microphone sensitivity is set to 1, 2 or 3,
the screen (16) operates in voice-activated mode
(VOX). When a signal is received, the screen (16)
automatically turns on and the connection icon (11)
lights up. When baby no longer makes noise, the
screen (16) and the connection icon (11) shut off
after 5 seconds. This extends battery life.
12. To see baby on the screen while he sleeps (when
not making any noise), hold down the On/Off
button (20) at any time to activate the transmitter.
The screen (16) displays the image for about 30
seconds, then turns off to save battery life.
N.B.: when the screen (16) is in VOX mode,
nothing happens when you hold down the On/
Off button (20).
13. You can talk to your baby at any time, using
the «walkie-talkie» function:
a. Hold down the walkie-talkie button (22).
b. Speak towards the microphone (18).
c. You will hear your voice on the speaker (7).
d. To adjust speaker volume, use the «Baby» menu.
e. To listen to baby, release the walkie-talkie button
(22).
14. A beep will sound each time you press an icon key.
To eliminate the beep, hold down the down icon
(13) for 2 seconds until you hear a beep. Whenever
you turn on or off the receiver, the beep will return.
13