Metra 99-5840CH Instrucciones De Instalación página 5

To the 99-5840CH radio trim panel:
1. Attach the engine start/stop switch
panel, and then the rubber button
membrane. (Figure A)
2. Secure the engine start/stop circuit
board and cover to the switch/cover
assembly using the (6)
#4 x 1/2" Phillips pan-head screws
provided. (Figure B)
KIT PREPARATION
(Figure A)
(Figure B)
(CONT.)
3. Insert the USB cable into the USB slot,
through the rear. (Figure C)
4. Attach the (4) panel clips provided.
(Figure D)
Continue to Kit Assembly
(Figure C)
(Figure D)
REV. 8/27/2018 INST99-5840CH
5