Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ISO DIN radio provision with pocket
1. Attach the pocket to the radio brackets
using the (4) #8 x 3/8" Phillips truss-head
screws provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio.
(Figure B)
Continue to Axxess
Interface Installation
6

KIT ASSEMBLY

(Figure A)
(Figure B)
ISO DDIN radio provision
1. Attach the brackets to the radio using
the screws supplied with the radio.
(Figure A)
Continue to Axxess
Interface Installation
(Figure A)
|
1.800.221.0932
MetraOnline.com

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido