Plug the device only into a socket installed according to safety regulations and with amains voltage
of 220 - 240V!
The AC/DC power adaptor must not come into contact with water or moisture.
The device should only come into contact with water up to the MAX marking.
Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of
handling electrical equipment.
Always remove the plug from the wall socket in case of any malfunction, after each use and before cleaning.
Only use the supplied power adapter.
Do not pull the plug out of the socket by its cable.
Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
The plastic surfaces, the water, the container and the cooked food can be hot during and after operation. Risk of
burns! Only touch with suitable protective gloves.
Do not touch the metal parts, in particular the immersion heater and the propeller.
Use a suitable container that guarantees a stable position of the device, danger of tilting!
Always operate with the protective cover.
Important information on product safety!
Do not expose your device to extreme temperatures, vibrations or shocks.
Do not immerse the device completely in water. Water can penetrate and cause malfunction. Not suitable for
dishwasher.
Operate the device on a heat and water resistant flat surface.
Do not operate the device on hot surfaces (such as hotplates).
Use only high quality vacuum sealer bags suitable for heating.
Elements
(see page 2 and 3)
Housing
Fig.01-A:
Socket for power adaptor at the back of instrument
Fig.01-B:
Support at the back of instrument.
Fig.01-C:
Protective cover
Display
Fig.02-A:
NOW = icon current temperature
Fig.02-B:
Thermometer symbol = current temperature
Fig.02-C:
Current temperature in ° C
Fig.02-D:
Warning symbol = low water level
Fig.02-E:
Target symbol = exact target temperature is reached
Fig.02-F:
TARGET = icon target temperature
Fig.02-G:
Circular symbol = device activated
Fig.02-H:
Timer symbol = cooking time
Fig.02-I:
Clock symbol = time delay
Fig.02-K:
Thermometer symbol = target temperature
Fig.02-L:
Stop symbol = device switches off
Fig.02-M:
Target temperature in ° C / delay / cooking time in hrs. / min.
10