TFA Sousmatic Manual De Instrucciones página 11

Buttons
Fig.01-D: Red main power switch ON-OFF at the back of instrument.
Fig.02-N: q button
Fig.02-O: START/STOP button
Fig.02-P: TIMER button
p button
Fig.02-Q:
Getting started
Ÿ Clean the device outside surface with a soft damp cloth before the first use.
Ÿ Place a cooking pot, a plastic or another suitable heat resistant container on a flat, stable and heat resistant
surface. Fasten the device support on the side of the pot. The removable bracket has two clamping levels,
depending on the gap which it is latched.
Ÿ Insert the power adapter pin into the device jack and connect the plug to a wall socket. Important! Make sure
that your household voltage is not more than 240V! Otherwise your device may be damaged.
Ÿ Fill the pot with water. The water level should be between the MIN and MAX markings.
Ÿ Place the vacuum sealer bag containing the food into the device. Ensure that the water level does not go over the
MAX marking.
Attention:
If the water level falls below the MIN marking, a permanent alert will sound, the warning symbol and the stop
symbol appear in the display and the instrument will turn off immediately.
Ÿ Slide the red switch on the back of the instrument to the position „ON".
Ÿ The red switch lights up.
Ÿ All segments will be displayed briefly.
Ÿ The icon NOW, the thermometer symbol and the current temperature appear at the top part of the display; on the
bottom part appear the icon TARGET, the thermometer symbol and the temperature (70,0°C default) flashes.
Select cooking mode
Simple cooking
Press the q or p button to set the desired target temperature.
Ÿ
Ÿ Press the START/STOP button to start the cooking process.
Ÿ The instrument turns on and a circular symbol will appear in the middle of the display.
Ÿ When the exact target temperature is reached, the target symbol appears in the display.
Cooking with time duration
Ÿ Press the TIMER button. The timer symbol appears on the display.
Ÿ The thermometer symbol and 70,0°C (default) flashes. Press the q or p button to set the desired target
temperature.
Ÿ Press the START/STOP button to confirm.
The timer symbol and 0:05 min. (default) flashes. Press the q or p button to set the desired time duration for
Ÿ
the cooking process.
Ÿ Press the START/STOP button to confirm.
Ÿ Press the START/STOP button again to start the cooking process with the desired time duration.
Ÿ The instrument turns on and the circular symbol appears in the middle of the display.
Ÿ After the cooking is finished, an alarm sounds and the stop symbol appears. The device will turn off automatically.
11