Hayward AquaVac 500 Serie El Manual Del Propietario página 7

Take a moment to get familiar with the cleaner.
Remove the cleaner by placing the carton down and
removing it from the box as shown. Models with a
caddy cart the cleaner and the Power Supply Control
should be mounted on the cart.
Caddy Cart Assembly
1.
3. Insert Upper Hook using 2 self-tapping screws 4. Remove plastic caps from axel. Lay cart on side, slide
HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.
GENERAL OPERATING INSTRUCTIONS
5. Mount cleaner & power supply
2. Insert Lower Hook using 2 self-tapping screws
one wheel onto axel.
Using a small hammer,
gently tap axel cap
onto axel.
Turn cart over and
install remaining
wheel and cap.
7