Hayward AquaVac 500 Serie El Manual Del Propietario página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6.
Plug the power supply cord into the GFCI protected
electrical outlet.
The power indicators should be slowly pulsing. This
7.
means that the power supply is in standby mode.
To turn on the power supply, press the power button. While
8.
the indicator lights are quickly pulsing select the desired
cleaning schedule.
a. Press the schedule button to select the desired schedule mode.
i. 1X = Single Cleaning Cycle. The cleaning cycle does not repeat
ii. 24h = Daily Cleaning. The robotic cleaner will turn on once
every 24 hours to perform the selected cleaning cycle. There
is a limit of 7 consecutive cleaning cycles in this mode.
iii. 48h = Every other day Cleaning. The robotic cleaner will
turn on once every 48 hours to perform the selected
cleaning cycle. There is a limit of 4 consecutive cleaning
cycles in this mode.
72h = Every third day Cleaning. The robotic cleaner will
iv.
turn on once every 72 hours to perform the selected
cleaning cycle.
NOTE: This schedule must be reset / selected WEEKLY.
This is to prevent damage to the cleaner if left unattended.
HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.

Publicidad

Tabla de contenido
loading

Tabla de contenido