Replacement Parts; Optional Accessories - Shure 565 Serie Guia Del Usuario

Polar Pattern
Cardioid (unidirectional)-uniform with frequency, symmetrical
about axis
180°
150° 150°
120°
90°
–20 dB
–15 dB
60°
–10 dB
–5 dB
30°
30°
0
125 Hz
500 Hz
1000 Hz
lmpedance
Dual. Microphone rating impedance is 150 ohms (250 ohms ac-
tual) for connection to microphone inputs rated at 19 to 300
ohms and "High" for connection to high-impedance microphone
inputs.
Wired for low impedance as supplied. To change impedance,
see sections on lmpedance Selection and Connections.
Output Level (at 1,000 Hz)
Open Circuit Voltage*
*0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)
Polarity
Positive pressure on diaphragm produces positive voltage on
pin 2 (with respect to pin 3).
REED
CARTRIDGE
SWITCH
CODED TERMINAL
GREEN
BLACK
YELLOW YELLOW
Switch
Built-in magnetic reed on/off switch with lockplate. To lock
switch in the ON position, remove screw on lockplate and turn
lockplate 180°. Reassemble and tighten screw.
180°
150°
120°
120°
90°
90°
–20 dB
–15 dB
60°
60°
–10 dB
–5 dB
30°
0
2000 Hz
400 Hz
8000 Hz
"L"
-56.0 dB -34.0 dB
(1.6 mV) (20 mV)
TRANSFORMER XLR CONNECTOR
GREEN
RED
BLUE
WHITE
BLACK
IMPEDANCE SELECTION SOCKET
(SHOWN IN LOW IMPEDANCE POSITION)
Cartridge Shock Mount
Internal rubber vibration-isolator
Cable
565SD-CN: 6.1 m (20 ft) two-conductor shielded, rubber-jacket-
ed, detachable, with XLR connectors.
150°
Swivel Adapter
120° Positive action, adjustable through 90° from vertical to horizon-
tal, permits easy removal for handheld use, suitable for mount-
ing on stand with
Case
90°
Chrome-plated die casting with steel mesh grille
Dimensions
60°
30°
51 mm
(2 in.)
Net Weight (less cable)
298 grams (10.5 oz)
"H"
CERTIFICATIONS
Eligible to bear CE Marking. Conforms to European EMC Direc-
tive 89/336/EEC. Meets applicable tests and performance criteria
in European Standard EN55103 (1996) parts 1 and 2, for residen-
tial (E1) and light industrial (E2) environments.
FURNISHED ACCESSORY
Swivel Adapter ...................................................... A25D

REPLACEMENT PARTS

Cartridge ...................................................................R65
Screen and Grille ................................................... RS65
Plug Element...................................................... RK169P

OPTIONAL ACCESSORIES

Line Matching Transformer ............................A95 Series
Desk Stand ..................................................S37A, S39A
Isolation Mount....................................................... A55M
Dual Mount............................................................. A26M
Windscreen .............................................. A58WS Series
Cable, LO-Z (7.6 m [25 ft]) ...................................... C25J
Cable, HI-Z (6.1 m [20 ft]) .................................... C20HZ
2
5
/ "-27 thread
8
161 mm
(6 7/16 in.)
22 mm
(7/8 in.) (3 11/16 in.)
34 mm
(1 11/32 in.)
93 mm
23 mm
(15/16 in.)