Preparing For Recording - Denon Professional DN-900R Guia De Inicio Rapido

Operation

Preparing for Recording

Notes:
•
Be sure to set the clock before use.
•
Before recording to an SD card, format the SD card on this unit.
To open the Utility menu
1. Press the power switch to turn on DN-900R.
2. While playback/recording is stopped, press Menu to display the menu list.
3. Turn the jog dial to select Utility and press Enter.
To set the Time/Date
1. Press Menu to display the menu list.
2. Select Utility and turn the jog dial to select Time/Date, then press Enter.
3. Turn the jog dial to select the input position (year/month/day/hour/minute), and press Enter.
4. Turn the jog dial to change the setting, then press Enter to confirm.
5. When all settings have been entered, they will be automatically saved and the Utility menu
will be displayed. If only some of the settings have been changed, but not all, press Back
twice. Fix and Discard will be shown on the display.
6. Turn the jog dial to select Fix and press Enter to confirm the settings. Select Discard to
discard the changes.
To format an SD card
1. Press Menu to display the menu list.
2. Select Utility and turn the jog dial to select Format Media, then press Enter. The list of
media devices will be shown on the display.
3. Turn the jog dial to select the desired media, then press Enter.
4. Turn the jog dial to select OK, then press Enter.
Formatting will be shown on the display during formatting, and Completed will be shown
when the formatting is complete.
You can also perform a speed check to test the read and write speed of the currently used
media.
1. Press Menu to display the menu list.
2. Select Utility, then select Speed Check. A list of media devices will be shown on the
display.
3. Turn the jog dial to select the desired media, then press Enter.
4. Rotate jog dial to highlight OK and press Enter to confirm selection.
5