Default Settings - Denon Professional DN-900R Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5.
When the check is complete, one of the following results will appear:
Good: The checked media is suitable for use.
Good w/o Rec Mon: The checked media is suitable for simple recording, but is
unsuitable for record monitoring.
Poor: The checked media is unsuitable for use.
6.
Select OK to end the test.
Recording
1.
Press the Record button. The unit will switch to a record paused state and the Record
button will flash.
2.
Use the jog dial to adjust the recording level. Hold the Shift button and use the jog dial to
adjust the recording balance.
3.
Press the Record button to begin recording.
The file name of the recording includes the UPnP (Universal Plug and Play) device name, the
recording start time, and user area data.
The file creation formats can be selected in System Setting > File Name Form. The file
name can be inputted when System Setting > User Area is On. After recording has started,
the recording start time in the file name continues to proceed until the recording start time is
confirmed.
4.
Press Stop to turn off recording.

Default Settings

The main default settings for DN-900R are as shown below.
Preset Setting
One Touch Record
Audio Input
Record Format
Record Channel
Sample Rate
Silent Skip
Play Range
Play Mode
6
Off
Bal
MP3-320
Stereo
44.1k
Off
Folder
Continuous
System Setting
Record Folder
Signal Pass Through
Output Rate
Line/Mic Lch
Line/Mic Rch
Serial Bit Rate
Current
On
Auto
Line
Line
9600

Publicidad

Tabla de contenido
loading

Tabla de contenido