Output Voltage; Input Gain - Alcad Mont Blanc CAD-704 Manual De Instrucciones

INPUT VHF-UHF [1]
In any position of the menus INPUT U/V 1, INPUT U/V 2, INPUT U3 or INPUT
U 4 press the keys ▲▼ at the same time to go back to main menu.

OUTPUT VOLTAGE

INPUT GAIN

Adjustable from 0 to 20 dB
SINGLE CHANNEL FILTER
To set the INPUT V/U 1 parameters press
menu.
Available channels:
BIII E5..E13 – DAB
UHF 21..48 with LTE700 5G filter
UHF 21..60 with LTE800 4G filter
UHF 21..69 without LTE filter
The input can be configured as BIII/DAB or UHF. Once a
filter is selected in BIII/DAB or UHF, the rest of the filters
must be from the same band.
The LTE filter is preset to 5G LTE700. It can be changed in
the ADVANCED menu.

Press to start the pointer
▲▼
to select ON or OFF to enable the remote power
supply on this input. Press
The remote power supply is set on 24V. It can be changed
to 12V in the ADVANCED menu.
Position the function selector
start the pointer to scroll options, select the desired
output level through the keys
▲▼
Press to position the function selector

CH and press .
- 16 -

to enter the
to scroll options then press

to confirm.
on GAIN and press
▲▼

and press to confirm.
on ADD 1

to