Series 912 - Us; Safety Instructions - Alcad 912-US Serie Manual Del Usuario

SERIES 912 - US

1.

SAFETY INSTRUCTIONS

To meet safety regulations, a differential cutout must protect the electric
installation. To connect the supply to the mains, use a connecting strip.
The green and yellow cable of the supply must be grounded to the mains
Do not remove the supply, amplifier
or receiver lids while the unit remains
connected to the mains. Authorised
technical staff must carry out all
repairs. All internal manipulation of
the units cancels every guarantee.
Fig. 2 - Do not manipulate while
+ 50 °C
-- 5 °C
Fig. 3 - Temperature range
Consult your supplier if you have any doubts about the installation,
operation or safety requirements of the units.
Serie 912 - US
230 V
connected
Make sure that the unit is properly ventilated. For
installation in a chest, use a CV-001 chest with built-
in fan (Cod. 9120068) or a CP-710 chest (Cod.
9050041) together with the VE-500 ventilator (
Cod. 9050043). Any unit operating beyond its
range of temperature (-5 to +50 ºC) may be
irreversibly damaged. Do not block or cover the
ventilation grooves on the supply or box.
Make all IF, RF and supply
connections before connecting
the units to the mains.
Fig. 1 - Make the supply
connections before connecting to
the mains
230 V
ENG - 21