Art SpiderJack 3 Manual Del Usario página 27

info climb-ART.com @
EN
Contamination/storage
If soiled, all parts of this equipment can be cleaned at temperatures of up to 40° C using
water and a neutral soap. After washing all textile components (insofar as these exist) must
be carefully rinsed with clear water. This device should be hung up to dry in a shaded and
well ventilated place. The equipment may not be dried on heated surfaces such as radiators
or near a fire. Contamination of the metal parts from tree resin can best be removed by
rubbing with butter.
This device must not be exposed to any damaging influences like sources of heat above
55°C, fire, flying sparks, caustic substances, acids (car batteries and their fumes), fuels,
oils etc., during use, transportation or storage. Care must be taken that there is suitable
packaging during transportation (bag).
27