Ir Out - ATON DH44 Manual Del Usario

DH44 4 Source, 4 Zone Digital Audio Router

IR OUT

Connect a standard IR Emitter (ATON AIE2, for example) from the IR OUT port on the front of the
DHSIP to the IR receiver on the front of the audio source (see Figure 3-15). For sources that
have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable
instead (see Figure 3-17).
Figure 3-16: IR OUT to Local Source - IR Emitter
Audio
Source
IR Input
IR IN
Figure 3-17: IR OUT to Audio Source
© 2008 • All rights reserved.
DHSIP Front
AIE2
Talk-Back
Emitter
CD
3.5mm Mono
Interconnect
Cable
3.5mm Interconnect Cable
DHSIP Front
23