Oven Light Bulb; Oven Racks - Kenmore 911.47722 Guía Para El Usuario

CAREAND CLEANING
Cleaning/Removable
Parts
_ CAUTION: You must
disconnect electdcal
power to the oven at
the main circuit
k)reaker or fuse box before
attempting to replace oven light
bulbs. Do not touch the light
bulbs with bare hands. The bulbs
get very hot very quickly. Wrap
foam rubber from bulb package
around bulb when installing.
When removing the bulb, wait
until the bulb has cooled and
use a dry cloth.
i, j
To give you the best lighting available,
your ovenhas two halogenbulbs. Both
lights are on the ceiling of the oven cavity.
Receptacle Socket
Glass
TO REMOVE Cover
1. You must disconnect electrical power
to the oven at the main circuit breaker
or fuse box.
2. Turnthe glass cover counterclockwise
V4 turn until the tabs of the glass cover
clear the groovesof the socket.
3. Pullstraight out to remove the bulb.
TO REPLACE
1. Wrap bulb with cotton cloth or bulb
packaging material. Don't touch bulb
withyour fingers.
2. Pushbulb straight into receptacle all
the way. Use only a 120-volt,35-watt
halogenbulb.
3. Place the tabs of the glass cover Tnto
the grooves of the socket.
4. Turn the glass cover clockwise
V4 turn.
5. Reconnectelectrical power to the
ovenat the maincircuit breaker or
fuse box.
CLEANINGMATERIALS
• Dishwashingdetergent
• Warmwater
• Scouringpad or soap-filled pad
Bump in
..o.Ou,°e
Bs,se. Bsc. IIll
TO REMOVE
1. Pullthe racks out to the stop lock
position.
2. Pullup the front of _qerack and slide
under the bump of the rack guide.
TO CLEAN
Clean withwarmwaterand detergent. For
hard to remove stains, gently scrub with a
scouring pad or a soap-filled pad. Rinse
well.
Gray porcelan-coated ovenracks may
also be cleaned in the oven during the
self-cleancycle. It is necessaryto wipe
the edges of gray porcelain-coated oven
racks witha Ifghtcoating of vegetable oil
after cleaning. This will help maintaTn the
easeof sliding the racks in and out
of the oven.
TO REPLACE
1. Place the raTsed back of the rack onto
the rack guides.
2. Lift the front of the rack until the rafsed
back slides under the bump of the
rack guides.
3. Slide the rack all the wayback.
23
213p306-2 ENv01 2J14/O3, 3:57 PM