Add Your Telephone/Tablet To The Alarm System; Information And Assistance; Meaning Of Leds - DELTA DORE TYDOM 2.0 Manual De Instalación

6.3 Add your telephone/tablet to the alarm system

1 2
Alarm
1- Press the 'Alarm' icon
2- Select the alarm control unit type
3- Set the control unit to 'add product' mode (Check the instructions).
4- Press 'continue'.
5- The alarm control unit beeps.
6- The alarm interface comes up on screen.
7- Synchronise the application with the alarm control unit by pressing the

7. Information and assistance

7.1 Meaning of LEDs

(maintenance mode)
T1 - System status
A - SIM card LED
B - GSM status LED
C - Internet connection
D - IP configuration LED
LED T1
Green on and steady
Flashing green
Flashing green/orange
Red steady
3 4
Continue
A
B
C
D
System status
System accessible locally and remotely
Good GSM signal and IP connection OK
GSM call in progress or IP connection in progress
Weak GSM signal and IP connection OK
No IP address allocated or no GSM signal
54
5
Bip
T1
T2
6
1
UIT AAN
icon
T3