S S S S S Tep 1. Connect Microfilters (If Necessary) Tep 1. Connect Microfilters (If Necessary) Tep 1. Connect Microfilters (If Necessary); Connect Microfilters To Telephone Devices - U.S.Robotics SureConnect 9000 Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
S S S S S tep 1. Connect Microfilters (If Necessary)
tep 1. Connect Microfilters (If Necessary)
tep 1. Connect Microfilters (If Necessary)
tep 1. Connect Microfilters (If Necessary)
tep 1. Connect Microfilters (If Necessary)
If there were no microfilters included in your package and your ISP did
not provide any, skip to Step 2 of these installation instructions.
If microfilters are required, install one on each telephone device
(telephones, answering machines, and fax machines) that shares the
same phone line (phone number) as the ADSL signal.
A microfilter is a small device used to lessen the amount of interfer-
ence between ADSL signals and telephone signals. Microfilters only
need to be used if the ADSL modem and a telephone device are sharing
the same phone line (phone number). If microfilters are not used,
background noise may be experienced on your telephone while data is
being transmitted. Data transmissions may experience interruption by
telephone calls if a microfilter is not used.

Connect Microfilters to Telephone Devices

To install the microfilter, plug the telephone into the microfilter, and
then plug the microfilter into the telephone wall jack. Do not install a
microfilter on the cable that connects your modem to the telephone
wall jack.
Before you plug the modem into the computer, you
must first install the software. Make sure that your
computer is on. You should have your operating
system CD-ROM readily available.
5 5 5 5 5

Publicidad

Tabla de contenido
loading

Tabla de contenido