Welcome
Thank you for choosing the Cisco Multiparty Media 410v Server.. This guide describes how to
install the server and prepare it for configuration. Detailed instructions on how to configure
the Telepresence Server application is provided online. See the Where to Go from Here
section for details.
Package Contents
Before you unpack the server, verify that all of the following items are present. If any item is
missing or appears to be damaged, contact your supplier immediately.
Cisco UCS C220 M4 Server
Rack‐mounting kit
Power cords (2)
KVM adaptor
Ethernet cable
Console cable
Cisco Multiparty Media 410v Server Quick Start Guide
Before You Begin
Ensure that you have the following before you unpack the server:
Space in a standard 19‐inch equipment rack (1 RU) for each server
110 / 220 VAC power feeds
VGA monitor and USB keyboard (not supplied) – for initial installation only
Ethernet network port or ports configured for the server connection
For Your Safety!
Before you work on any equipment, be aware of the hazards that are involved with electrical
circuitry and be familiar with standard practices for preventing accidents.