Device Control By Smartphone - Klarstein VitAir Turbo SMART Manual Del Usario

DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the
associated Klarstein app. The app not only allows you to remotely control the device via
your smartphone, but also gives you access to recipes and additional information.
Follow these steps to connect your smartphone to the VitAir:
1. Download the Klarstein app first by scanning the QR code with your smartphone
(see below).
2. Make sure your smartphone is connected to the same WiFi network that the VitAir is
to be connected to.
3. Open the Klarstein app.
4. Search for the VitAir via the device search or scan the VitAir code.
5. Open the device control.
7. Turn on the device.
8. Follow the instructions from the app.
App Download
Use the scan function of your smartphone to scan the QR code and save the app on
your smartphone.
10032731
Note: Additional information on how to use the app will be given by the app upon
opening it for the first time.
10032732 10032734
EN
29