Important Safety Information
This unit is not intrinsically safe. Do not use this unit in a Hazardous Location. Refer to
Article 500 of the National Electric Code for information on Hazardous Locations. Using
this tool in a Hazardous Location can result in a fire or explosion.
Failure to observe this warning will result in severe injury or death.
Electric shock and fire hazard:
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Use test leads or accessories that are appropriate for the application. See the
category and voltage rating of the test lead or accessory.
• Inspect the test leads or accessory before use. They must be clean and dry, and the
insulation must be in good condition.
• Use this unit for the manufacturer's intended purpose only, as described in this
manual. Any other use can impair the protection provided by the unit.
Failure to observe these warnings can result in severe injury or death.
4
Electric shock hazard:
Contact with live circuits can result in severe injury or death.