Intended Use - Bosch LR8 Instrucciones De Funcionamiento Y Seguridad

Use the tool, accessories, etc., in accordance with these in-
structions and in the manner intended for the particular type of
tool, taking into account the working conditions and the work
to be performed. Use of the tool for operations different from
those intended could result in a hazardous situation.
Have your tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of
the tool is maintained.
Develop a periodic maintenance schedule for tool. When clean-
ing a tool be careful not to disassemble any portion of the tool
since internal wires may be misplaced or pinched or may be
improperly mounted. Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may damage plastic parts.
The tool is intended for detecting pulsating line lasers.
Inserting/Replacing the Battery
Alkaline batteries are recommended for the tool.
Pull the latch 16 of battery lid outward and open the battery lid 15.
When inserting batteries, pay attention to the correct polarity.
When the battery low indicator a appears for the first time on the
display 6, the measuring tool can still be operated for approx. 2 h.
for extended periods, the batteries can corrode and discharge
themselves.
2610050387 03-18 LR8.indd 7
Service
SAVE THESE INSTRUCTIONS.

Intended Use

Preparation
Remove the batteries from the tool when not
using it for extended periods. When storing
-7-
3/20/18 3:08 PM