Description; Introduction; Packing List; Optional Accessories - AKG SR 40 SINGLE Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
SR 40 SINGLE-Hex:Layout 1

2.1 Introduction

2.2 Packing List

2.3 Optional Accessories

2.4 SR 40 SINGLE
Receiver

2.4.1 Front Panel

Fig. 1: Front panel controls on

SR 40 SINGLE receiver.

Refer to fig. 1.
14
01/21/2008
10:42

2 Description

Thank you for purchasing an AKG product. This Manual contains important instructions for
setting up and operating your equipment. Please take a few minutes to read the instruc-
tions below carefully before operating the equipment. Please keep the Manual for fu-
ture reference. Have fun and impress your audience!
1 SR 40 SINGLE
receiver
(see sticker on packaging)
• Check that the packaging contains all of the items listed for your system. Should any item
be missing, please contact your AKG dealer.
• For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The SR 40 SINGLE is a stationary receiver for use with all WMS 40 and Microtools Series
transmitters. It features a half-rack case for mounting in a 19" rack.
The SR 40 SINGLE provides one reception channel and operates on a single fixed, quartz sta-
bilized frequency in the 660 MHz to 865 MHz UHF frequency range.
1 ON/OFF: On/off pushbutton switch with status LED.
2 Antenna: Fixed-length UHF antenna permanently mounted on the front panel.
3 VOLUME: This rotary control adjusts the receiver's output level from microphone to line
level for matching to the input sensitivity of your mixer or amplifier.
4 RF OK: This LED illuminates to indicate that signal is being received. If no signal is re-
ceived or the automatic squelch is on, the RF OK LED goes out and the audio output is
muted.
5 AF CLIP: This LED illuminates to indicate the audio level of the received signal is over-
loading the receiver's audio section.
6 Color code lines: The color indicates the receiving frequency of the receiver. Transmit-
ters tuned to the same frequency are marked with the same color. Refer to the Manual
Supplement sheet for a color code table.
Seite 14
(Schwarz/Black Auszug)
1 AC adapter
1 Manual Supplement
sheet
SR 40 SINGLE

Publicidad

Tabla de contenido
loading

Tabla de contenido