Rear Pane; Automatic Squelch - AKG SR 40 SINGLE Modo De Empleo

SR 40 SINGLE-Hex:Layout 1
7
7 Carrier frequency label: A label indicating the receiving frequency and approval marks
of your receiver is affixed to the rear panel of the receiver.
8 AUDIO OUT: Balanced TRS 1/4" jack, adjustable from mic to line level. You can connect
the output either to an XLR microphone input or to an unbalanced line input on a mixer
or amplifier.
9 Strain relief for the feeder cable of the supplied AC adapter.
10 DC ONLY: Input connector for the supplied AC adapter.
The automatic squelch circuit switches the receiver off if the received signal is too weak, in
order to suppress the related noise or the residual noise of the receiver while the transmit-
ter is off.
SR 40 SINGLE
01/21/2008 10:42
2 Description
10
9
Seite 15 (Schwarz/Black Auszug)
2.4.2 Rear Panel
Fig. 2: Rear panel on
SR 40 SINGLE receiver.
Refer to fig. 2.

2.4.3 Automatic Squelch

15