Ts Recorder; Ts Analyzer - Promax TG-140 Manual De Instrucciones

USER'S MANUAL. TG-140
10.2

TS Recorder

The TS Recorder can record an input Transport Stream to a file in the hard disk.
Click on File/Save as and select the name of the file you want to save.
If the Hardware Alarm Buffer is red it means that data are being lost because the
input rate is to high. Currently the maximum input rate is about 200 Mbps but this rate is
reduced when the processor is doing some other task or the hard disk is a bad quality
one. When simultaneously playing and recording a file the maximum combined rate is
about 80 Mbps say 40 Mbps for the player and 40 for the recorder.
10.3

TS Analyzer

With the TS Analyzer you can see what are the contents of a Transport Stream
file. The current version of the TS Analyzer decodes the Program Association Tables
and the Program Map Tables.
To analyze a file click on File/Open. Then click on Analyze. It is not necessary to
analyze the whole file to see the tables so you can start the analysis before it has
completely finished reading the whole file by pressing Stop.
With the TS Analyzer you can see the description of the streams (audio, video,
private) and its Packet Identifiers PIDs.
02/2013
Figure 14.-
Page 27