C - iNSTALLATiON
1 - CONNECTION FROM THE INTERCOM PANEL AND THE MONITOR
Notes:
• The electric strike plate must have a maximum voltage of 12V dc and a maximum power supply of 1A.
• The automated gate drive must be connected to a dry contact input (input for key contact, for
example).
To 12V electric
strike plate (not
included)
To dry contact input for opening
automated gate drive (not
included)
The cable's length determines which cable section
is to be used:
Cable length
0 to 25m
25 to 50 m
50 to 100m
Connection from the dry contact (automated gate drive) to the intercom panel
Cable length
0 to 50 m
8
EN
1
2
Connection from the intercom panel to the monitor
Colour video interCom 18Cm
To optional monitor (not
included, reference 512265)
1
2
3
4
Section to use
0.6 mm telephone cable
0.75mm²
1.5mm²
Section to use
0.75mm²
15Vdc 1A mains
adaptor, included