Detach The Interface Cable; Pairing Scanner And Cradle Host; Paging The Scanner - Bematech S-100W Guía De Referencia Rápida

Quick Operation Guide - Wireless Handheld Laser/CCD Scanner

5. Detach the Interface Cable

There is a hole on cradle cable box, and use a sharp pin to push down the hole
while using another hand gently pull out the interface cable to release it slowly.

6. Pairing Scanner and Cradle Host

This scanner supports three radio communication types,
• Cradle Host,
• SPP (Serial Protocol Profile) Slave
• SPP (Serial Protocol Profile) Master.
For further information, please check the Quick Operation Guide on out website
(www.bematech.com).

7. Paging the Scanner

Paging the scanner often happens when you have two or more pairs of scanners
and communication cradles, and can not find which scanner pairs with its cradle.
Press any key on cradle, and it sends out a signal to its paired scanner, this
scanner beeps 3 beeps and lights BLUE LED 3 times. But if the scanner is out
of its receiving range, then it won't react to the cradle.
32