Operation - AL-KO AMS Mammut Manual Del Usuario

Ocultar thumbs Ver también para AMS Mammut:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62

Operation

OPERATION
Radio remote control
a
c
d
f
Fig. 2: Radio remote control
a
LEDs
b
Main switch (I = ON / 0 = OFF)
c
Joystick
d
Move left-hand drive unit away from
wheel
e
Move right-hand drive unit away from
wheel
f
Move left-hand drive unit towards wheel
g
Move right-hand drive unit towards wheel
ADVICE
Two-hand operation!
Switches d + e or f + g must always be
pressed together.
Meaning of the LEDs
Operating state LED
Maximum climbing ability reached
Maximum drive temperature reached
Remote control battery status
694 873_b
Joystick functions
1
I
4
b
0
2
Fig. 3: Joystick functions
e
1
g
2
3
4
Activating the drives
The drives must never be activated when the ca-
ravan is coupled to the towing vehicle. Risk of da-
mage to the drives!
Positioning drives on the wheels
The numbers in brackets in this section refer to
figure 2.
Working steps
1. Switch on the radio remote control at the mas-
2. Press the contact keys (f and g) at the same
Drive supply battery status
Only retracting now possible – driving func-
tion blocked! see >Troubleshooting<
Forward motion area
Reverse motion area
Turning area, clockwise rotation on the
spot
Turning area, anticlockwise rotation on
the spot
CAUTION!
Risk of crushing!
During activation, the drives are enga-
ged with the wheels. During activation,
ensure that nobody can reach unnoticed
between the drives and the tyres!
CAUTION!
The drives are not allowed to be used as
a parking brake!
ter switch (b).
All LEDs light up briefly one after ano-
ther.
After that, the LED for the operating sta-
tus starts to flash green.
time.
3
21

Publicidad

Tabla de contenido
loading

Tabla de contenido