Pairing A Bluetooth Device - ION STREET ROCKER Guia De Inicio Rapido

Pairing a Bluetooth Device

1. Adjust the Function switch on Street Rocker to the BT/USB/SD position.
2. Turn on your Bluetooth device.
3. Navigate to your Bluetooth device's setup screen, find Street Rocker and connect. A voice
prompt will be heard saying "Bluetooth pairing" when pairing and "Bluetooth connected" when
connected to your Bluetooth device.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. Press and hold the Play/Pause button to disconnect from a paired Bluetooth device. A voice
prompt will be heard saying "Bluetooth disconnected" when disconnected from the Bluetooth
device.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce
the overall volume of Street Rocker using the Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the
bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is poor AM reception: When you have a Bluetooth device that is connected, disconnect
your Bluetooth device in order to listen to AM radio. To adjust AM reception, move the entire unit.
If you cannot connect your audio device to Street Rocker via Bluetooth:
•
Have your audio device (e.g., smartphone or tablet) and Street Rocker as close together as
possible while trying to connect. Make sure both the audio device and Street Rocker are
unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on Street Rocker to disconnect Street Rocker from any other
audio device and restart the search process. If this does not work right away, power off Street
Rocker and then power it back on. See
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You
can find this under the Bluetooth menu in the Settings for your phone or other audio device.
If this does not work, and you have connected to Street Rocker before, find Street Rocker in the
list of available or previously connected devices in your audio device's Bluetooth menu, tap the
"gear" or "i" icon located next to it and then select Unpair or Forget. Turn Street Rocker off and
back on and try pairing again once it reappears in your available devices list.
Note: If Street Rocker has been paired to another audio device recently that is still within range,
you may need to repeat this process with that audio device to fully disconnect.
12
Pairing a Bluetooth Device for more information.