Disposal; What If There Are Problems - Beurer BF 710 BodyShape Instrucciones Para El Uso

Báscula para diagnóstico
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
IMPORTANT
• Do not use aggressive solvents or cleaning agents!
• Never immerse the unit in water!
• Do not wash the unit in a dishwasher!

12. Disposal

Disposal of the battery
• The empty, completely flat batteries must be disposed of through specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries containing harmful substances:
PB = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Disposal of devices
For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities responsible for waste disposal.

13. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display
No initials
"
"
"
" runs across
the LCD.
or incorrect weight
is displayed.
or incorrect weight
is displayed..
Incorrect weight is
displayed.
No Bluetooth
con-
®
nection ( symbol is
missing).
Cause
Unknown measurement as it is
outside the user assignment limit
or a unique assignment is not
possible.
The fat percentage is outside the
measurable range (less than 3 %
or greater than 65 %).
The maximum load-bearing capa-
city of 180 kg was exceeded.
No flat, stable surface.
Not standing still.
Scale zero setting is incorrect.
Device outside the range.
User memory space is full. No
more measurements can be
saved.
The batteries in the scale are empty. Replace the batteries of scale.
Remedy
Assign unknown measurement in app or
repeat user assignment.
Ensure that your scale user is set up cor-
rectly in the app.
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
The load must not exceed 180 kg
Place the scale on a flat, stable surface.
Stand as still as possible.
Wait until the scale switches itself off. Acti-
vate scale, wait for "0.0 kg" to appear and
repeat measurement.
Ensure that your scale user is set up cor-
rectly in the app.
The Bluetooth symbol is only displayed on
the scale display when required.
The minimum range in a free field is approx.
25 m. Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WLAN routers,
microwaves, induction hobs etc.
Open the app. The data is transferred auto-
matically. This may take up to one minute.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido