GE Profile 26 Manual Del Propieratio E Instalacion página 30

Installation Instructions
INSTALLING THE REFRIGERATOR {cont.}
[] REMOVE THE FREEZER DOOR (cont.J
r_ use the tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire door.
r_ set the door front on o nonscratching surface.
r_ Pushthe roil ossemblies bock into the cobinet.
CAUTION:
P ushboth sides of the rail
assemblies back at the some time.
[] REPLACING THE FREEZER DOOR
Two people mog be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
r_ Pullout the rail assembliesto the full length on each side
of the cabinet.
CAUTION:
Hoke sure to pull out the side
roilsevenlg.
I_ REPLACING THE FREEZER DOOR (cont.I
rB] Hang the freezer door front onto open slots
on the sides.
Slot
_'] Tighten screws completelg. (Thereore four
10 mm hex-head bolts.)
REPLACE THE FREEZER BASKET
Replacethe freezer basket bg lowering it into the frame.
3O