GE Profile 26 Manual Del Propieratio E Instalacion página 31

Ocultar thumbs Ver también para Profile 26:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Instructions
[]
REPLACINGTHE FREEZER DOOR (cont.)
REPLACE THE FREEZER BIN
Hook the ends of the freezer bin into both brockets,ond push
down until they lock into place. (Seepoge 19.)
[]
CONNECTING THE REFRIGERATOR
TO THE HOUSE WATER LINE
%
A cold water supply is required for automatic icemaker
operation. If there is not a cold water supply, you will
need to provide one. SeeInstalling the Water Line
section.
NOTES:
• Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.
• If your refrigerator does not have a water filter,we
recommend installing one if your water supply has
sand or particles that could clog the screen of the
refrigerator's water valve. Install it in the water line
near the refrigerator. If using GESmartConnecf'_
Refrigerotor Tubing Kit, you will need an additional
tube (WXO8XIO002) to connect the filter.Do not cut
plastic tube to install filter.
If you are using copper tubing, place a compression
nut and ferrule (sleeve)ontothe end of the tubing
coming from the house cold water supply.
If you are using the GESmartConnect'" tubing,
the nuts are already assembled to the tubing.
@
[]
CONNECTING THE REFRIGERATOR
TO THE HOUSE WATER LINE (cont.)
If you are using copper tubing, insert the end
of the tubing into the refrigerator connection,
at the back of the refrigerator,as far as possible.
While holding the tubing, tighten the fitting.
If you are using GESmartConnect'" tubing, insert
the molded end of the tubing into the refrigerator
connection, at the back of the refrigerator,and tighten
the compression nut until it is hand tight. Then tighten
one additional turn with a wrench. Overtightening may
cause leaks.
r_
Fasten the tubing into the clamp provided to hold it in
position. You may need to pry open the clamp.
Ferrule
1/4"
(sleeve)
Compression
Refrigerator
//Nut
Connection ...............
/ ....
/
SmartConnect T _
___..._,
_/
Tubing _-___
[]
TURN ON THE WATER SUPPLY
Turn the water on at the shutoff valve (housewater
supply) and check for any leaks.
I_] PLUG IN THE REFRIGERATOR
Seethe grounding information attached to the power
cord.
31

Publicidad

Tabla de contenido
loading

Tabla de contenido