System Overview; Installing Your Tiiwee Alarm System In Four Simple Steps - Tiiwee X1 Manual De Usario

Intended use
The Tiiwee Home Alarm System is designed primarily to deter a burglar when he is
trying to enter your home. The basis of the system is the X1 siren. Place the siren
in your home where burglars are most likely to enter. If you have a larger home,
please consider placing addi onal Tiiwee sirens.
The system is ready for use. Your system is pre-configured, and the sensors and
remote controls are connected to the X1 siren. Window sensors are connected
to zone 1. If a PIR mo on sensor is included, it is connected to zone 2. We advise
reading this user manual carefully and to familiarize yourself with its basic
opera ng principle and ways to fine-tune it to your exact needs.

System overview

SET bu on
On/Off bu on
Remote Control
Ac va on bu on:
ac vates the alarm
unit
"S" bu on: Changes
the no fica on
sound from
doorbell-sounds
to siren
Siren
Zone indica on
Deac va on bu on:
Deac vates the alarm
unit
Emergency bu on:
triggers a loud alarm
sound. Press the
Deac va on bu on
to stop
2

Installing Your Tiiwee Alarm System in four simple steps

1. Unpack: Unpack all kit components and lay them in front of you on the table.
2. Remove Ba ery Protec on:
X1 Siren: Open the back panel from the X1 siren and remove the white ba ery
protec on. You hear one beep, and the X1 siren switches on automa cally.
3