Using The Tester; Network Cable Testing; Error Lndicator - C-LOGIC 3400 Manual De Instrucciones

2.Using the Tester

2.1 Network Cable Testing

WARNING
TO AVOID ELECTRICAL SHOCK AND INJURY,
UNPOWER THE CIRCUIT WHILE PERFORMING
TESTS.
2.1.1 Error Indicator
A wire pair indicator flashes (indicator #13,14,15,16)
indicates an error in the connection. Error indicator
flashes specify an error. If more than one wire pair
indicator flashes, troubleshoot on each case until all
the indicators go back to GREEN(Normal).
Fig.1 SHORT
Fig.2 MISWIRE
Fig.3 REVERSED
Fig.4 SPLIT PAIRS
08