Klarstein BellaVita Manual De Instrucciones página 18

EN
Important: Clean the
milk frothing system
after each use to avoid
any milk residue. User
can simply wash the
milk tank and clean the
tube under tap water,
then fill in the milk tank
with clean water and
press clean button.
18
(5) Milk foam
• To detach the milk tank assembly, carefully hold the milk tank by one hand, and
press the button on right side of milk tank cover by another hand to remove the milk
tank assembly, gently move out the milk tank assembly to the side at the same time.
• Remove the milk tank cover by pressing the release button on the side of the milk
tank cover, flipping it up to one side and taking it off.
• Add the milk into the milk tank. Always fill the milk beneath the max mark. The
suggested temperature for milk is 4-8 °C.
• Put on the milk tank cover, insert the milk tank assembly into the correct position.
Adjust the angle of milk foam spout to the right place by using the milk frothing
lever.
• Press the milk foam button.
• The button will be illuminated white. The pump will work intermittently to pump the
water and the milk foam will come out to your cup.
• The milk foam cycle will complete once the unit beeps once.
(6) Self-Cleaning
• Fill water into water tank to max mark.
• Short press the cleaning button. The clean button will flash. The pump will start
working intermittently, and clean the milk frothing system for 60 seconds.
• The self-cleaning will complete once the unit beeps once, and machine enters into
standby mode.
(7) Descaling and intense cleaning of the machine
Fill water into water tank to max mark, and put white household vinegar into water. Press
the cleaning button over 3 seconds. The clean button will flash. The unit will start first step
of cleaning:
1 The pump will work intermittently for 20 seconds for coffee brewing system.
2 The pump will intermittently work for 20 seconds for milk frothing system.
3 The unit repeats step1 and 2 for 22 cycles independently.
4 The first step of cleaning finishes. The light is on. Press cleaning button again to enter
2nd step. Be reminded to add enough water into water tank to continue the 2nd
step of descaling.
5 The pump works intermittently for 2 min to clean the milk frothing system.
6 The pump works intermittently for 3 minutes and 40 seconds to clean the coffee
brewing system.
7 The cleaning is completed with the unit beeps twice. And the unit will back to
standby mode.