Using the Oven
Start/Pause/Cancel Function
1. For every function, press
2. Press
3. Press
Lamp Setting
1. Press
2. Press
3. Press
Inquiring for Time
While cooking is in progress or the reminder was set, press
time�
Child Lock Function
To Lock:
Press and hold
beep will sound and
disabled�
To Unlock: Press and hold
beep will sound and
■
Note:
Alternatively to unlock the Child Lock, switch OFF the power supply.
Switching display from °F to °C
The default temperature setting display is
1. Press
2. Press
3. Press
°C
4.
will be visible on the display.
5. The display will change to clock indicating the current time.
Follow the same steps when switching display from °C to °F.
■
Note:
•
Setting will be effective unless the plug is disconnected. Once the circuit breaker is
turned off or power failure occurs, the display setting will return to °F.
•
Press
twice when you cancel the procedure after performing step 2. Otherwise, the
oven will start heating and continue for 9 hours.
EN-10
to start operating the function.
once to pause the function. To resume the function, press
twice to cancel the function.
once,
will be visible on the display.
to switch on the lamp. (No heating takes place.)
twice to switch off the lamp.
and
and
3 times.
will be visible on the display.
.
again and hold for approximately 3 seconds.
simultaneously for approximately 3 seconds,
will be visible on the display� All controls will be
simultaneously for approximately 3 seconds,
will go off� All controls are ready for use�
°F
.
.
to see the current