Klein Tools LAN Scout Jr. Manual De Instrucciones página 5

WIRING AND DISPLAY EXAMPLES
P r o p e r l y W i r e d T 5 6 8 A U T P :
T568B is electrically identical to
T568A, but swaps the green and
orange pairs. Either standard will
work as long as the same standard
is used at both ends of a run or
patch cable. Mixing "A" and "B"
creates a cross-over cable.
T 5 6 8 A C a b l e w i t h S p l i t P a i r s :
A common error in building a cable
is to put all the pairs in pin sequence
1-2, 3-4, 5-6 and 7-8. This will
produce the correct continuity, but
the pairs are designated to be on
pins 3-6 and 4-5 in the middle of
the connector for compatibility with
phone wiring. This wiring error is
only detected by the split pair test
since the designated pairs are not
twisted together.
5