Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Features

Back Panel

1.
Power: Hold this button to power
Solar Stone Multi on and off.
2.
Bluetooth: Press and hold this button
for 2 seconds to disconnect from a
connected Bluetooth device.
Note:
Solar
automatically power off after 15
minutes if no audio is playing.
Link: Press and hold this button for two seconds to enable linking or disable linking.
3.
4.
Charging Adapter Input: Insert the included charging adapter here to charge the Solar
Stone Multi battery.
Solar Stone Multi should be fully charged prior to first use for maximum battery life. Once
fully charged, Solar Stone Multi's solar panel can provide suitable power for typical daily
use without the need to connect the charging adapter. Results will vary depending on
daily number of hours Solar Stone Multi is exposed to direct sunlight.
5.
Reset: If Solar Stone Multi is working abnormally, shutdown the unit by placing a narrow,
sharp object into the Reset hole located on the bottom of Solar Stone Multi, and gently
push until the unit turns off. Try this only after you have first attempted to reboot Solar
Stone Multi using the power button.
Charging LED: This LED is solid red when the battery is charging and turns off when the
6.
battery is fully charged/no adapter is connected.
Bluetooth LED: This LED blinks while Bluetooth searching, and is lit solid when
7.
Bluetooth connected.
Link LED: This green LED is solid when linking is enabled.
8.
4
Stone
Multi
will
6
7
1
2
8
4
5
LINK
3

Publicidad

Tabla de contenido
loading

Tabla de contenido