Installing the SIM card and
battery
Before you can start exploring your new
phone, you'll need to set it up. To insert the
SIM card and battery:
1
To remove the battery cover, hold the
phone firmly in one hand. With your
other hand, lift off the battery cover with
your thumbnail as shown in figure.
NOTE: Put your thumbnail into the
USB port hole and lift off the battery
cover.
2
Slide the SIM card into the SIM card
slot. Make sure the gold contact area
on the card is facing downwards.
3
Insert the battery into place by aligning
the gold contacts on the phone and the
battery (1) and pressing it down until it
clicks into place (2).
11