User Controls; Measure A Package-Bottles - Hach ORBISPHERE 29971 Manual De Usuario

Figure 7 Package adjustment
Operation
Personal injury hazard. Glass components can break. Handle with care to prevent cuts.

User controls

The user controls are:
• Orange vertical position lever—Adjusts the height of the unit for different packages
• Lateral protective plates—Adjust the height of the unit
• Piercing lever—Lowers or lifts the piercing unit to pierce the package
• Piercing and sampling assembly—Lowers or lifts the sampling tube into the package liquid
contents
Measure a package—Bottles
Pre-requisite: Complete all of the preliminary checks in
1. Put the beverage sampler below the hole of the piercing head support plate and adjust the
package to the center.
Note: The manufacturer recommends that the bottle protection is used in bottle measurements. Put the bottle
in the bottle protection. Make sure that the bottle cap is at the same level as the bottle protection. Add or
C A U T I O N
Startup on page 13.
English 15