Washing a load of laundry
[Draining water added by the Water Jet
function]
•
Select a cycle and press START/PAUSE.
The washer drains the water.
•
If the washer is off before it starts the
wash cycle, it drains the water added by
the Water Jet function. However, if you
turn the washer off during a wash cycle
to use the Water Jet function, and then
turn the washer back on, it does not
drain the water.
NOTE
•
The Water Jet function supplies water
through the Mist Shower nozzle for 1
second when it is first activated after
the washing machine turns on, and then
through the Water Jet nozzle.
46 English
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 46
CAUTION
•
Do not over-use the Water Jet
function. Excessive use increases water
consumption.
•
When pouring water from the Built-in
sink into the tub, do it gently. Otherwise,
water may overflow and spill out of the
tub.
•
Use caution when removing laundry
from the tub. You may bump your head
on the Built-in sink.
•
Do not block the Water Jet outlet with
hands. Water may leak outside the tub,
causing a system failure.
•
Put only clothes to prewash in the Built-
in sink. Do not clean shoes, wash food,
or wash pets in the Built-in sink.
•
Do not open the Built-in sink quickly.
Water remaining in the sink may splash
on the lid or control panel.
•
Due to differences in air pressure, water
coming from the Water Jet outlet may
splatter when you first activate it.
•
Make sure the lid is closed tightly before
you start a load of laundry.
2017-04-18
9:59:51