Maintenance; General Maintenance - EGO PSA1000 Manual Del Usuario

MAINTENANCE

WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
therefore, they are always in operating condition. To prevent serious personal injury,
take extra precautions and care when performing maintenance, service or for changing
the cutting attachment or other attachments.
WARNING:
the power head before servicing, cleaning, changing add-on attachments or when the
product is not in use.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
WARNING:
water or other liquids.
CLEANING
◾ ◾
After each use, remove the battery and clean debris from the chain and guide bar
with a soft brush. Wipe the pole saw surface with a clean cloth moistened with a
mild soap solution.
◾ ◾
Remove the chain-sprocket cover, and then use a soft brush to remove debris
from the guide bar, saw chain, sprocket and chain-sprocket cover.
◾ ◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
All pole saw service, other than the items listed in these maintenance instructions,
should be per formed by competent pole saw service personnel.
When servicing, use only identical replacement parts. Use of any
Battery tools do not have to be plugged into an electrical outlet;
To prevent serious personal injury, remove the battery pack from
Do not at any time let brake fluids, gasoline, petroleum-based
When cleaning the pole saw attachment, DO NOT immerse it in
POLE SAW ATTACHMENT — PSA1000
21